পণ্যের বিবরণ

বাড়ি পণ্য

BLUFLOC Anionic Polyacrylamide 20 to 100 Mesh for Oil and Gas Drilling Fluid Stabilization

ব্র্যান্ড নাম:	BLUWAT
মডেল নম্বর:	ব্লুফ্লক
MOQ:	1000 কেজি
মূল্য:	আলোচনাযোগ্য
ডেলিভারি সময়:	7-10 কর্মদিবসের মধ্যে
পেমেন্ট শর্তাবলী:	D/A, D/P, L/C, T/T, ওয়েস্টার্ন ইউনিয়ন

বিস্তারিত তথ্য

পণ্যের বর্ণনা

বিস্তারিত তথ্য

উৎপত্তি স্থল:

চীন

সাক্ষ্যদান:

ISO9001, SGS, BV

নাম:

উন্নত তেল পুনরুদ্ধারের জন্য Polyacrylamide

ট্রেড নাম:

Blufloc PAM

আণবিক ওজন:

উচ্চ আণবিক ওজন

আয়নিক প্রকার:

অ্যানিওনিক

চেহারা:

অফ হোয়াইট গ্রানুলার পাউডার

কণার আকার:

20 থেকে 100 মেশ

আণবিক ওজন গ্রেড:

25 মিলিয়ন পর্যন্ত

অ্যানিওনিক ডিগ্রি:

5 থেকে 100 শতাংশ পরিসর

কঠিন বিষয়বস্তু:

সর্বনিম্ন 89 শতাংশ

বাল্ক ঘনত্ব:

প্রায় 0.8

অবশিষ্ট মনোমার:

সর্বোচ্চ ০.০৫ শতাংশ

প্রস্তাবিত কাজের ঘনত্ব:

0.1 থেকে 0.5 শতাংশ

1 শতাংশ সমাধানের pH:

অ্যানিওনিক টাইপের জন্য প্রায় 6 থেকে 8

শেলফ লাইফ:

2 বছর

প্যাকেজিং:

25 কেজি ব্যাগ বা 750 কেজি বড় ব্যাগ

প্যাকেজিং বিবরণ:

25 কেজি ব্যাগ বা 750 কেজি ব্যাগ

পণ্যের বর্ণনা

BLUFLOC Anionic Polyacrylamide 20 to 100 Mesh for Oil and Gas Drilling Fluid Stabilization

BLUFLOC Anionic Polyacrylamide is a high molecular weight water soluble polymer powder designed for oil and gas drilling fluid applications. With 20 to 100 mesh particle size, anionic charge and stable powder quality, it can be dissolved into water and used as a functional polymer additive for water based drilling mud systems.

20 to 100 Mesh PAM Powder Oil and Gas Drilling Fluid Water Based Drilling Mud Rheology Control Shale Stabilization Factory Direct Supply

Product Overview

In oil and gas drilling, drilling fluid stability is critical. The mud system must maintain suitable viscosity, carry cuttings, reduce friction, support borehole stability and help control filtrate invasion into sensitive formations.

If the drilling fluid is unstable, common problems may include shale swelling, borehole enlargement, poor cuttings transport, excessive fluid loss, unstable rheology and higher drilling risk.

BLUFLOC Anionic Polyacrylamide helps improve the stability of water based drilling mud by enhancing viscosity, supporting suspension, improving mud structure and helping reduce the negative influence of shale and fine solids dispersion.

It is suitable for oilfield drilling fluid stabilization, drilling mud rheology control, shale stabilization, lubrication improvement and selected oilfield wastewater treatment applications.

Key Product Features

20 to 100 Mesh Powder

Controlled granular powder form supports practical industrial handling, storage and solution preparation.

Drilling Fluid Stabilization

Suitable for oil and gas drilling fluid stabilization in water based mud systems.

Viscosity Improvement

Helps improve water based drilling mud viscosity and supports more stable circulation.

Rheology Control

Supports drilling mud rheology control and helps maintain consistent mud performance.

Cuttings Suspension

Helps improve cuttings suspension and carrying capacity during drilling fluid circulation.

Shale Stabilization

Supports shale stabilization and borehole wall protection in sensitive formations.

Lubrication Support

Can help improve lubrication in drilling fluid circulation and reduce friction during drilling operation.

Fluid Loss Control Support

Supports fluid loss control and helps improve mud system stability when used in suitable formulations.

Stable Product Quality

Minimum 89 percent solid content supports reliable quality and consistent field dosing.

Economical Field Use

Low dosage requirement helps reduce total chemical consumption in oilfield applications.

Technical Specifications

Item	Specification
Product Name	BLUFLOC Anionic Polyacrylamide
Product Type	High Molecular Weight PAM Powder
Ionic Type	Anionic
Appearance	Off White Granular Powder
Particle Size	20 to 100 Mesh
Molecular Weight Range	5 to 25 Million for Anionic Type
Anionic Degree	5 to 100 Percent Range
Solid Content	Minimum 89 Percent
Bulk Density	About 0.8
Residual Monomer	Max 0.05 Percent
Recommended Working Concentration	0.1 to 0.5 Percent
pH of 1 Percent Solution	Around 6 to 8 for Anionic Type
Storage Temperature	0 to 35 Degree C
Shelf Life	2 Years
Package	25 kg Bag or 750 kg Big Bag
Available Documents	TDS, MSDS and COA

Main Applications in Oil and Gas Drilling

Drilling Fluid Stabilization

BLUFLOC Anionic Polyacrylamide is used to improve the stability of water based drilling fluid systems. It helps the mud maintain better viscosity, suspension and rheological performance during drilling circulation.

Water Based Drilling Mud Additive

This product is suitable for water based mud systems where an anionic polymer is required to improve drilling fluid performance. It can be used as a viscosifier, stabilizing aid and rheology support polymer.

Shale Stabilization

In shale and clay rich formations, water invasion may cause swelling and dispersion. BLUFLOC Anionic Polyacrylamide helps support shale stabilization by improving mud performance and reducing instability caused by poor drilling fluid control.

Borehole Wall Protection

Stable drilling fluid helps protect the borehole wall and reduce formation instability. Anionic PAM supports mud structure and helps maintain better borehole conditions during drilling.

Cuttings Suspension

Drill cuttings must be carried from the bottom of the well to the surface. High molecular weight anionic polyacrylamide helps improve suspension and carrying capacity, reducing the risk of cuttings settling in the mud system.

Fluid Loss Control Support

BLUFLOC Anionic Polyacrylamide can support fluid loss control by improving the polymer structure of the drilling mud. Better filtration behavior helps reduce excessive filtrate invasion into sensitive formations.

Lubrication Improvement

After proper dissolution, anionic PAM forms a polymer solution that can improve lubrication in water based drilling mud. This helps support smoother mud circulation and reduce friction during drilling operation.

Oilfield Wastewater Treatment

In addition to drilling fluid stabilization, BLUFLOC Anionic PAM can also be used in selected oilfield wastewater clarification, mud water treatment and solid liquid separation processes.

Customized Oilfield Polymer Support

Bluwat can recommend HA7525, HA6518, AA6518 or other customized anionic PAM grades according to drilling mud requirements and field conditions.

Why 20 to 100 Mesh Particle Size Matters

The 20 to 100 mesh particle size is suitable for industrial handling, storage and solution preparation. A controlled granular powder form helps the product disperse into water under proper agitation and supports more consistent solution preparation.

For oilfield drilling operations, correct dissolution is important. If PAM is not fully dissolved, the drilling fluid may not receive stable viscosity improvement, rheology support or filtration control performance.

The powder should be added slowly into clean water and fully dissolved before being introduced into the drilling mud system.

How BLUFLOC Anionic PAM Stabilizes Drilling Fluid

After dissolution, BLUFLOC Anionic Polyacrylamide forms a high molecular weight polymer solution. When added into a water based drilling fluid system, the polymer chains help improve viscosity, suspension and mud structure.

Cuttings and Fine Solids Suspension

Helps suspend drilling cuttings and fine solids during mud circulation.

Stable Rheology

Supports more stable rheology during drilling fluid circulation.

Shale Dispersion Reduction

Helps reduce shale dispersion and borehole instability in water based mud systems.

Better Mud Consistency

Improves mud consistency, circulation performance and overall drilling fluid stability.

It can also support fluid loss control when used in a suitable drilling mud formulation.

Typical Problems This Product Can Help Improve

Unstable drilling mud viscosity

Poor cuttings suspension

Shale swelling and dispersion

Borehole instability

Weak water based mud performance

Excessive filtrate invasion

Poor lubrication during mud circulation

Fine solids dispersion in drilling fluid

Unstable mud rheology under field conditions

Need for a high molecular weight anionic drilling fluid polymer

General Dosing Guidance

The actual dosage depends on drilling mud formulation, water salinity, temperature, mud density, shale activity, target viscosity, required fluid loss control level and compatibility with other additives.

Laboratory testing or field trial is recommended before large scale application. For oil and gas drilling fluid stabilization, the product should be tested with the existing mud system to confirm compatibility with salts, fluid loss reducers, lubricants, pH adjusters, weighting materials and other drilling fluid additives.

Bluwat can provide product selection advice and dosing recommendations according to customer field requirements.

Product Advantages for Oilfield Buyers

Drilling Fluid Stabilization

Suitable for oil and gas drilling fluid stabilization in water based mud systems.

Practical Solution Preparation

20 to 100 mesh powder form supports practical handling and stable solution preparation.

High Molecular Weight Option

High molecular weight anionic PAM option is available for strong viscosity and suspension support.

Water Based Mud Support

Supports drilling mud viscosity, rheology, cuttings suspension and mud stability.

Shale and Borehole Protection

Helps improve shale stabilization and borehole wall protection in sensitive formations.

Lubrication and Fluid Loss Support

Can support lubrication improvement and fluid loss control in suitable mud formulations.

Stable Powder Quality

Minimum 89 percent solid content supports stable field dosing and consistent product quality.

Factory Direct Supply

Factory direct supply from China with TDS, MSDS, COA and customized grade options available.

Packaging and Storage

Packaging

25 kg kraft paper bag with inner PE liner
750 kg jumbo bag available
OEM packaging available according to order requirement

Storage

Store in a cool, dry and ventilated warehouse
Avoid direct sunlight and moisture
Keep the package sealed after opening
Recommended storage temperature is 0 to 35 Degree C
Shelf life is 2 years under proper storage conditions
Water soluble, non flammable and non explosive under normal storage conditions

Bluwat Factory Supply Capability

Bluwat Chemicals is a professional manufacturer and global exporter of polyacrylamide and water treatment chemicals with more than 25 years of manufacturing experience.

Bluwat supplies anionic polyacrylamide, cationic polyacrylamide, nonionic polyacrylamide and emulsion polyacrylamide for oilfield drilling, EOR, wastewater treatment, mining, papermaking, municipal sewage treatment and sludge dewatering.

For oilfield customers, Bluwat can provide technical support, sample support, TDS, MSDS, COA, product selection recommendations and customized PAM grades according to drilling mud formulation and field conditions.

Available Documents

Technical Documents

TDS available
MSDS available
COA available

Buyer Support

Sample support available
OEM packaging available
Customized product recommendation available

FAQ

What is BLUFLOC Anionic Polyacrylamide used for in oil and gas drilling?

BLUFLOC Anionic Polyacrylamide is used for drilling fluid stabilization, water based mud viscosity improvement, shale stabilization, cuttings suspension, lubrication support and fluid loss control support.

What does 20 to 100 mesh mean?

20 to 100 mesh refers to the particle size range of the polyacrylamide powder. This granular form is suitable for industrial handling and solution preparation.

Is this product suitable for water based drilling mud?

Yes. BLUFLOC Anionic Polyacrylamide is suitable for water based drilling mud systems where viscosity, rheology and mud stability need to be improved.

Can it help stabilize shale formations?

Yes. It can support shale stabilization by improving drilling fluid performance and helping reduce shale dispersion in water based mud systems.

Can it improve drilling mud lubrication?

Yes. After proper dissolution, the polymer solution can support better lubrication in drilling fluid circulation.

What is the recommended dissolving concentration?

The recommended dissolving concentration is 0.1 to 0.5 percent.

How long does it take to dissolve?

Normally it takes about 1 hour under proper agitation conditions.

Can it be used together with other drilling fluid additives?

Yes. It can be used in drilling mud formulations together with other additives, but compatibility testing is recommended before field application.

Can Bluwat recommend a suitable grade?

Yes. Bluwat can recommend HA7525, HA6518, AA6518 or other customized anionic PAM grades according to drilling mud requirements and field conditions.

Need Anionic PAM for Oil and Gas Drilling Fluid Stabilization?

BLUFLOC Anionic Polyacrylamide supports water based drilling mud stabilization, viscosity improvement, rheology control, cuttings suspension, shale stabilization, lubrication support and fluid loss control. Bluwat can provide factory direct supply, technical documents, sample support and customized PAM grade selection for oilfield customers.

ট্যাগ:

জল পরিশোধন রাসায়নিকের

জল প্রতিপাদন এজেন্ট

আয়নীয় পলিিয়াক্র্লাইড

Cationic Polyacrylamide

Polyaluminium ক্লোরাইড

চতুর্থাংশ অমমিনিয়াম পলিমার

অনিয়ীয় পলিিয়াক্রেলাইড

রঙ অপসারণ রাসায়নিক

ড্রিলিং কাদা additives

ডিসিডেন্ডিয়ামাইড ফরমালডিহাইড রজন

পোলিওঅ্যাট্রোলাইট ফ্লোককুলেণ্ট

Ferric Sulphate

রঙ ফিক্সিং এজেন্ট

কোয়জুলান্ট এবং ফোককুলান্ট

উদ্ভিদ ভিত্তিক ডিওডোরেন্ট

এন্টি ফোমিং রাসায়নিক

রাসায়নিক ডেমুলসিফায়ার

জল পরিশোধন রাসায়নিকের

জল প্রতিপাদন এজেন্ট

আয়নীয় পলিিয়াক্র্লাইড

Cationic Polyacrylamide

Polyaluminium ক্লোরাইড

চতুর্থাংশ অমমিনিয়াম পলিমার

অনিয়ীয় পলিিয়াক্রেলাইড

রঙ অপসারণ রাসায়নিক

ড্রিলিং কাদা additives

ডিসিডেন্ডিয়ামাইড ফরমালডিহাইড রজন

পোলিওঅ্যাট্রোলাইট ফ্লোককুলেণ্ট

Ferric Sulphate

রঙ ফিক্সিং এজেন্ট

কোয়জুলান্ট এবং ফোককুলান্ট

উদ্ভিদ ভিত্তিক ডিওডোরেন্ট

এন্টি ফোমিং রাসায়নিক

রাসায়নিক ডেমুলসিফায়ার

পণ্যের বিবরণ

BLUFLOC Anionic Polyacrylamide 20 to 100 Mesh for Oil and Gas Drilling Fluid Stabilization

BLUFLOC Anionic Polyacrylamide 20 to 100 Mesh for Oil and Gas Drilling Fluid Stabilization

Product Overview

Key Product Features

Technical Specifications

Main Applications in Oil and Gas Drilling

Drilling Fluid Stabilization

Water Based Drilling Mud Additive

Shale Stabilization

Borehole Wall Protection

Cuttings Suspension

Fluid Loss Control Support

Lubrication Improvement

Oilfield Wastewater Treatment

Customized Oilfield Polymer Support

Why 20 to 100 Mesh Particle Size Matters

How BLUFLOC Anionic PAM Stabilizes Drilling Fluid

Typical Problems This Product Can Help Improve

Recommended Solution Preparation

General Dosing Guidance

Product Advantages for Oilfield Buyers

Packaging and Storage

Packaging

Storage

Bluwat Factory Supply Capability

Available Documents

Technical Documents

Buyer Support

FAQ

What is BLUFLOC Anionic Polyacrylamide used for in oil and gas drilling?

What does 20 to 100 mesh mean?

Is this product suitable for water based drilling mud?

Can it help stabilize shale formations?

Can it improve drilling mud lubrication?

What is the recommended dissolving concentration?

How long does it take to dissolve?

Can it be used together with other drilling fluid additives?

Can Bluwat recommend a suitable grade?

Need Anionic PAM for Oil and Gas Drilling Fluid Stabilization?